thymalfasin is one of those subjects where the details matter more than the headlines. This page pulls together the background, the mechanisms, and the practical points readers ask about most.
Last reviewed on 2026-03-30. Where a claim depends on a specific study, the study is described rather than over-claimed.
The peptide occurs naturally in thymic tissue and has been detected in serum and other biological fluids. Reported concentrations are low, and reliable measurement generally requires immunoassay or mass spectrometry with an enrichment step. It is released from a larger precursor, prothymosin alpha, by proteolytic cleavage, although the enzymes involved are not fully characterized. Whether circulating levels reflect thymic output specifically remains an open question.
Thymosin alpha 1 is a 28-amino-acid peptide first isolated from thymosin fraction 5, a bovine thymic extract. Its sequence begins with an acetylated serine residue and carries a high proportion of acidic residues, so the molecule has a net negative charge near neutral pH. Despite the shared name, it is unrelated in sequence to the thymosin beta family. Synthetic material prepared by solid-phase peptide synthesis is identical in sequence to the natural peptide.
The lyophilized peptide is generally stable for extended periods when kept cold and dry. Once dissolved, aqueous solutions are less stable; hydrolysis, oxidation, and aggregation can degrade the material. Storage at -20 °C or lower slows these processes. Repeated freeze-thaw cycles are best avoided because they can promote aggregation. The exact shelf life depends on formulation, pH, and concentration, so stability studies are typically performed for each specific product.
Quality control for thymosin alpha-1 focuses on identity, purity, and potency. Identity is confirmed by mass spectrometry and amino acid analysis, while purity is assessed by chromatography with limits on related substances and residual solvents. Potency assays may use cell-based immune readouts, but these are not standardized across laboratories. Regulatory status differs by jurisdiction; no product is approved in the United States for clinical use, whereas some other countries register injectable forms for specific indications.
| Property | Value | Notes |
|---|---|---|
| Molecular formula | C129H215N33O55 | Calculated for the acetylated 28-residue peptide |
| Appearance | White to off-white powder | Lyophilized solid recovered from aqueous buffer |
| Solubility | Freely soluble in water | Typically dissolved in water or buffer before use |
| Typical storage | -20 C or below, desiccated | Protect from light and avoid repeated freeze-thaw cycles |
| Identity testing | Reverse-phase HPLC with mass spectrometry | Retention time and measured mass confirm the sequence |
Thymosin alpha-1 is supplied as a lyophilized powder in most research settings. The solid dissolves readily in water and in common aqueous buffers, and it is typically reconstituted shortly before use. Solutions are clear and colourless at ordinary working concentrations. Because the peptide is hygroscopic, weighing and reconstitution are usually performed with minimal exposure to ambient air. Aliquots are prepared to avoid repeated freeze-thaw cycles, and working solutions are kept cold.
Long-term storage is generally at minus twenty degrees Celsius or colder, preferably desiccated and protected from light. Lyophilized material is more stable than reconstituted solution, which degrades faster at room temperature. Stability depends on pH, ionic strength, and the presence of oxidising agents. Published stability data for the peptide are limited, so storage claims in catalogues should be treated as general guidance rather than measured guarantees. Freeze-thaw cycles are kept to a minimum.
在信号层面，Tα1可能通过Toll样受体等模式识别受体发挥作用。部分实验显示，它能激活髓样分化因子88依赖的通路，进而促进核因子κB进入细胞核。这导致白细胞介素2、干扰素γ和白细胞介素12等细胞因子的转录增加。这些细胞因子偏向辅助性T细胞1型应答，有助于细胞免疫。然而，具体受体和结合位点尚未完全确定，不同实验模型的结果存在差异。
临床研究将Tα1用于慢性病毒感染、肿瘤辅助治疗和疫苗佐剂等场景。部分试验报告了免疫学指标改善，但临床终点获益在不同研究中并不一致。系统综述指出，研究间在人群、剂量和联合方案上差异较大，难以汇总结论。因此，Tα1的确切临床地位仍属开放问题，需要更多高质量随机对照试验来澄清。其机制研究也需从体外实验向体内模型推进。
胸腺素α1对免疫系统的影响涉及多种细胞类型。研究表明，它可促进未成熟T细胞向成熟T细胞分化，并增强T细胞对抗原刺激的增殖反应。树突状细胞在Tα1存在下表达更高水平的共刺激分子，从而更有效地呈递抗原。此外，自然杀伤细胞的活性也观察到上升。这些效应并非直接杀伤病原体，而是调节宿主免疫应答的强度与方向。
Lyophilized material is generally held at reduced temperature to slow degradation, and storage at minus twenty degrees Celsius or lower is common practice for long-term retention. Short-term working portions are often kept between two and eight degrees Celsius. Once dissolved, the peptide is less stable than the dry powder, and repeated freeze-thaw cycles are associated with loss of material and with aggregate formation. Vials are usually allowed to reach room temperature before opening so that condensation does not introduce moisture, and solutions are protected from light where practical.
Identity and purity are assessed mainly by reversed-phase high-performance liquid chromatography, which separates the peptide from closely related impurities and from truncated or oxidized variants. Mass spectrometry supplies the molecular mass and confirms the expected sequence length, while amino acid analysis can be used to check composition. Because the molecule has no chromophore beyond the peptide backbone, ultraviolet detection is typically performed at a low wavelength, where baseline interference from solvents and buffers is a practical concern. Water content and counter-ion content are often reported alongside purity.
Practical handling focuses on limiting adsorption and contamination. The peptide dissolves readily in water, and dilute solutions tend to adhere to plastic and glass surfaces, so an inert carrier protein or a defined buffer can reduce losses in laboratory work. Workers also record the counter-ion form, since an acetate or trifluoroacetate salt changes the mass balance of the weighed powder. Documentation of lot number, purity value, and storage history supports reproducibility when results from different laboratories are compared.
Storage recommendations center on low temperature, dryness, and protection from repeated freezing and thawing. The intact powder is commonly held at 20 degrees below zero Celsius or colder, while a working solution is divided into single-use aliquots to limit freeze-thaw cycles. Buffered saline or phosphate-buffered saline at neutral pH is frequently used as a diluent. Light sensitivity is not well documented, yet amber vials or foil wrapping are common practice for long-term storage of peptide stocks.
Identity and purity are assessed with a small set of standard peptide methods. Reversed-phase high-performance liquid chromatography separates the main peak from truncated or oxidized species, and its area percentage is the usual purity measure. Mass spectrometry confirms the observed molecular mass against the expected value, while amino acid analysis or peptide mapping checks composition and sequence. Specifications for research-grade material are often stated as 95 percent or higher, though the exact limit depends on the supplier and the intended use.
Laboratory supplies of the peptide usually arrive as a lyophilized powder in sealed vials. The powder is hygroscopic, so a vial should be allowed to reach room temperature before it is opened to prevent condensation on the contents. Weighing and transfer are best performed in a low-humidity environment with clean tools. Once dissolved, the solution should be mixed gently rather than vortexed, because foaming and shear can reduce recovery of the peptide.
ACTA2 (actin alpha 2) is an actin protein with several aliases including alpha-actin, alpha-actin-2, aortic smooth muscle or alpha smooth muscle actin (α-SMA, SMactin, alpha-SM-actin, ASMA). Actins are a family of globular multi-functional proteins that form microfilaments. ACTA2 is one of six different actin isoforms and is involved in the contractile apparatus of smooth muscle. ACTA2 (as with all the actins) is extremely highly conserved and found in nearly all mammals. In humans, ACTA2 is encoded by the ACTA2 gene located on 10q22-q24. Mutations in this gene cause a variety of vascular diseases, such as thoracic aortic disease, coronary artery disease, stroke, Moyamoya disease, and multisystemic smooth muscle dysfunction syndrome. ACTA2 (commonly referred to as alpha-smooth muscle actin or α-SMA) is often used as a marker of myofibroblast formation. Studies have shown that ACTA2 is associated with TGF-β pathway that enhances contractile properties of hepatic stellate cells leading to liver fibrosis and cirrhosis.
Different isoforms of actin are present in the cell nucleus. The level of actin isoforms may change in response to stimulation of cell growth or arrest of proliferation and transcriptional activity. Research on nuclear actin is focused on isoform beta. However the use of antibodies directed against different actin isoforms allows identifying not only the cytoplasmic beta in the cell nucleus, but also alpha- and gamma-actin in certain cell types. The presence of different isoforms of actin may have a significant effect on its function in nuclear processes, as the level of individual isoforms can be controlled independently. Functions of actin in the nucleus are associated with its ability to polymerize and interact with various ABPs and with structural elements of the nucleus. Nuclear actin is involved in:
ACTA2 (actin alpha 2) is an actin protein with several aliases including alpha-actin, alpha-actin-2, aortic smooth muscle or alpha smooth muscle actin (α-SMA, SMactin, alpha-SM-actin, ASMA). Actins are a family of globular multi-functional proteins that form microfilaments. ACTA2 is one of six different actin isoforms and is involved in the contractile apparatus of smooth muscle. ACTA2 (as with all the actins) is extremely highly conserved and found in nearly all mammals. In humans, ACTA2 is encoded by the ACTA2 gene located on 10q22-q24. Mutations in this gene cause a variety of vascular diseases, such as thoracic aortic disease, coronary artery disease, stroke, Moyamoya disease, and multisystemic smooth muscle dysfunction syndrome. ACTA2 (commonly referred to as alpha-smooth muscle actin or α-SMA) is often used as a marker of myofibroblast formation. Studies have shown that ACTA2 is associated with TGF-β pathway that enhances contractile properties of hepatic stellate cells leading to liver fibrosis and cirrhosis.
Actin-binding proteins (also known as ABPs) are proteins that bind to actin. This may mean ability to bind actin monomers, or polymers, or both. Many actin-binding proteins, including α-actinin, β-spectrin, dystrophin, utrophin and fimbrin, do this through the actin-binding calponin homology domain. This is a list of actin-binding proteins in alphabetical order. 25kDa 25kDa ABP from aorta 30akDA 30bkDa 34kDA 45kDa 110 kD dimer ABP 110 kD (Drebrin) p53 p58gag p185neu p116rip a-actinin Abl ABLIM Actin-Interacting MAPKKK Ssk2p ABP120 ABP140 Abp1p ABP280 (Filamin) ABP50 (EF-1a) Acan 125 (Carmil) ActA Actibind Actin Actinfilin Actinogelin Actin-regulating kinases Actin-Related Proteins Actobindin Actolinkin Actopaxin Actophorin Acumentin (= L-plastin) Adducin ADF/Cofilin Adseverin (scinderin) Afadin AFAP-110 Affixin Aginactin AIP1 Aldolase Angiogenin Anillin Annexins Aplyronine Archvillin (isoform of Supervillin) Arginine kinase Arp2/3 complex Band 4.1 Band 4.9 (Dematin) b-actinin b-Cap73 Bifocal Bistramide A BPAG1 Brevin (Gelsolin)
Sources: en.wikipedia.org
ACTA2 (actin alpha 2) is an actin protein with several aliases including alpha-actin, alpha-actin-2, aortic smooth muscle or alpha smooth muscle actin (α-SMA, SMactin, alpha-SM-actin, ASMA). Actins are a family of globular multi-functional proteins that form microfilaments. ACTA2 is one of six different actin isoforms and is involved in the contractile apparatus of smooth muscle. ACTA2 (as with all the actins) is extremely highly conserved and found in nearly all mammals. In humans, ACTA2 is encoded by the ACTA2 gene located on 10q22-q24. Mutations in this gene cause a variety of vascular diseases, such as thoracic aortic disease, coronary artery disease, stroke, Moyamoya disease, and multisystemic smooth muscle dysfunction syndrome. ACTA2 (commonly referred to as alpha-smooth muscle actin or α-SMA) is often used as a marker of myofibroblast formation. Studies have shown that ACTA2 is associated with TGF-β pathway that enhances contractile properties of hepatic stellate cells leading to liver fibrosis and cirrhosis.
Although most yeasts have only a single actin gene, higher eukaryotes, in general, express several isoforms of actin encoded by a family of related genes. Mammals have at least six actin isoforms coded by separate genes, which are divided into three classes – alpha, beta, and gamma – according to their isoelectric points. In general, alpha actins are found in muscle (α-skeletal, α-aortic smooth, α-cardiac), whereas beta and gamma isoforms are prominent in non-muscle cells (β-cytoplasmic, γ1-cytoplasmic, γ2-enteric smooth). Although the amino acid sequences and in vitro properties of the isoforms are highly similar, these isoforms cannot completely substitute for one another in vivo. Plants contains more than 60 actin genes and pseudogenes. The typical actin gene has an approximately 100-nucleotide 5' UTR, a 1200-nucleotide translated region, and a 200-nucleotide 3' UTR. The majority of actin genes are interrupted by introns, with up to six introns in any of 19 well-characterised locations. The high conservation of the family makes actin the favoured model for studies comparing the introns-early and introns-late models of intron evolution.
Although most yeasts have only a single actin gene, higher eukaryotes, in general, express several isoforms of actin encoded by a family of related genes. Mammals have at least six actin isoforms coded by separate genes, which are divided into three classes – alpha, beta, and gamma – according to their isoelectric points. In general, alpha actins are found in muscle (α-skeletal, α-aortic smooth, α-cardiac), whereas beta and gamma isoforms are prominent in non-muscle cells (β-cytoplasmic, γ1-cytoplasmic, γ2-enteric smooth). Although the amino acid sequences and in vitro properties of the isoforms are highly similar, these isoforms cannot completely substitute for one another in vivo. Plants contains more than 60 actin genes and pseudogenes. The typical actin gene has an approximately 100-nucleotide 5' UTR, a 1200-nucleotide translated region, and a 200-nucleotide 3' UTR. The majority of actin genes are interrupted by introns, with up to six introns in any of 19 well-characterised locations. The high conservation of the family makes actin the favoured model for studies comparing the introns-early and introns-late models of intron evolution.
Sources: en.wikipedia.org
As filaments grow, the pool of available G-actin molecules is managed by G-actin-binding proteins such as profilin and thymosin β-4. Profilin ensures a supply of available actin-ATP by binding to ADP-bound G-actin and promoting the exchange of ADP for ATP. Profilin's binding to the actin molecule physically blocks its addition to a filament's (−) end, but permits it to join the (+) end. Once the actin-ATP has joined the filament, profilin releases it. As formins promote the nucleation and extension of new actin filaments, they recruit profilin to the area, increasing the local concentration of actin-ATP to boost filament growth. In contrast, thymosin β-4 binds and sequesters actin-ATP, preventing it from joining a microfilament. Once an actin fiber is established, the dynamics of its growth or collapse are influenced by numerous proteins. Existing strands can be interrupted by filament cleaving proteins, such as cofilin and gelsolin. Cofilin binds along two actin-ADP molecules in a filament, forcing a movement that destabilizes the filament and causes it to break. Gelsolin inserts itself between actin molecules in a filament, disrupting the filament. After the filament breaks, gelsolin remains attached to the new (+) end, preventing it from growing, thus forcing its disassembly.
Sac6 Sla1p Srv2 (CAP) S-adenosyl-L-homocysteine hydrolase, (SAHH) Sla2p Synaptopodin Scinderin (adseverin) Synapsins Scruin Spectrin Severin Spectraplakins SVSII Shot (Short stop) Spire Shroom Smitin (Smooth Musc.Titin) Supervillin SipA Smoothelin Sucrose synthetase SipC Sra-1 Spinophilin Ssk2p Swinholide Talin protein Toxophilin Twinfilin Tau Trabeculin Twinstar TCP-1 Transgelin Transgelin 2 Transgelin 3 Tensin Tropomodulin Thymosin Tropomyosin Titin Troponin TOR2 Tubulin bIV Ulapualide Utrophin Unc-87 Unc-60 (ADF/cofilins) VASP Vav Verprolin VDAC Vibrio cholerae RTX toxin Villin Vinculin Vitamin D-binding protein WIP WASp Y-box proteins YpkA (YopO) Zipper protein Zo-1 Zyxin The Encyclopaedia of Actin-Binding Proteins (and Drugs)– alphabetical list, sourced profile for each Maciver, Sutherland (ed.). "The Encyclopaedia of Actin-Binding Proteins (and Drugs)". Maciver Lab Web Page (online ed.). School of Biomedical Sciences, University of Edinburgh. Archived from the original on 2005-11-24. Actin-Binding+Proteins at the U.S. National Library of Medicine Medical Subject Headings (MeSH)
Cardiac alpha actin is a 42.0 kDa protein composed of 377 amino acids. Cardiac alpha actin is a filamentous protein extending from a complex mesh with cardiac alpha-actinin (ACTN2) at Z-lines towards the center of the sarcomere. Polymerization of globular actin (G-actin) leads to a structural filament (F-actin) in the form of a two-stranded helix. Each actin can bind to four others. The atomic structure of monomeric actin was solved by Kabsch et al., and closely thereafter this same group published the structure of the actin filament. Actins are highly conserved proteins; the alpha actins are found in muscle tissues and are a major constituent of the contractile apparatus. Cardiac (ACTC1) and skeletal (ACTA1) alpha actins differ by only four amino acids (Asp4Glu, Glu5Asp, Leu301Met, Ser360Thr; cardiac/skeletal). The actin monomer has two asymmetric domains; the larger inner domain comprised by sub-domains 3 and 4, and the smaller outer domain by sub-domains 1 and 2. Both the amino and carboxy-termini lie in sub-domain 1 of the outer domain.
Actin, gamma-enteric smooth muscle is a protein that in humans is encoded by the ACTG2 gene. Actins are highly conserved proteins that are involved in various types of cell motility, and maintenance of the cytoskeleton. In vertebrates, three main groups of actin isoforms, alpha, beta and gamma have been identified. The alpha actins are found in muscle tissues and are a major constituent of the contractile apparatus. The beta and gamma actins co-exist in most cell types as components of the cytoskeleton, and as mediators of internal cell motility. Actin, gamma 2, encoded by this gene, is a smooth muscle actin found in enteric tissues. ACTG2 has been shown to interact with Emerin. Human ACTG2 genome location and ACTG2 gene details page in the UCSC Genome Browser.
Sources: en.wikipedia.org
It is a 28-amino-acid peptide originally purified from a bovine thymic extract and later produced synthetically. It is studied mainly for its effects on immune cell function.
No. The two peptides share part of a name but differ in length, sequence, and net charge. Literature searches that treat them as one compound return misleading results.
Solid-phase peptide synthesis is the usual route, and recombinant expression has also been described. Both approaches produce material matching the natural sequence.
Reverse-phase HPLC with ultraviolet detection at 214 nm is common. Mass spectrometry is used to confirm molecular identity and detect modifications. Immunoassays exist but may not distinguish the intact peptide from fragments.